SMP

SMP Series Connectors

The new Anoison SMP BLIND-MATE CONNECTOR offer customers a low cost alternative for those applications where the small size of an SMP is desired. They are available in both through hole and surface mount configurations and smooth bore or limited bore interfaces.

Anoison SMP micro-miniature connectors have been optimized for VSWR performance in micro strip designs and feature excellent matching characteristics. Cable connectors will accept flexible cable, conformable and semi-rigid cables. The Full Detent interface is generally used for cable connections, where a more secure mating is required. The Limited Detent is typically selected as the Snap-On interface for PCB mount and blind-mate applications.

Two kinds of slide-on interfaces, Smooth Bore and Catcher's Mitt, compensate for axial and radial misalignment, and have the same engage / disengage force. However the Catcher's Mitt interface design makes it easier to connect more accurately, and is generally used for blind-mate applications.

Click Here for Detailed Connector Drawings & Specifications   
Characteristics
Electrical 
Impedance50 Ω
Frequency RangeDC to 40 GHz
Typical VSWR1.20 Max thru 26.5 GHz;
1.50 Max thru 40.0 GHz
Insulation Resistance5,000 megohms
DWV(@sea level)500 Vrms
Power Handling(@sea level & ambient temperature) 120W-5.5f(frequency)
RF Leakage-80db to 3 GHz, -65db to 26.5 GHz

 

Mechanical 
Interface Design: MIL-STD-348A, Series SMP
Engagement ForceFull Detent (FD): 15 lbs (66.7 N) max.
Limited Detent (LD): 10 lbs (44.5 N) max.
Smooth Bore (SB): 2 lbs (8.9 N) max.
Disengagement Force Full Detent (FD): 5 lbs (22.25 N) max.
Limited Detent (LD): 2lbs (8.9 N) max.
Smooth Bore (SB): 0.5 lbs (2.2 N) max.
Contact Retention1.5 pounds min. axial force
Axial Misalignment 000/.010”
Radial Misalignment.010”centerline to centerline(.020” with special shrounds)
DurabilityFull Detent (FD): 100 mating cycles min.
Limited Detent (LD): 500 mating cyclesmin.
Smooth Bore (SB): 1000 mating cycles min.

 

Environmental 
Temperature Range-55°C to +155°C
Thermal ShockMIL-STD-202, Method 107, Condition B (except high temp +155°C or max high temp of cable)
CorrosionMIL-STD-202, Method 101, Condition B
Shock (specified pulse)MIL-STD-202, Method 213, Condition I
VibrationMIL-STD-202, Method 204, Condition D
Moisture ResistanceMIL-STD-202, Method 106 (except step 7b omitted)



CAN’T FIND WHAT YOU NEED!

Contact us, we can assist with unique requirements.