4.3-10

4.3-10 Series Connectors

The new 4.3-10 Series connectors are designed to address the increasing demands in the mobile communications industry including increasing performance demand, low PIM and at the same time reducing its size to support ongoing space reduction requirements.

■ A major improvement with the 4.3-10 series of connectors is achieved by separating the electrical and mechanical reference planes. The result is a flexible solution with one universal jack and 3 available plug types. The three coupling mechanisms (hand-screw, screw and push pull) can meet the same universal jack (female) and have the same low PIM and return loss performance. At the same time, the design requires up to 5 times less torque than previous connector types. This enables the connectors to be installed without tools (hand-screw and push-pull) or using a simple wrench (screw).

■ The 4.3-10 connectors are a much more compact design which allows for higher connector density on equipment while reducing the weight up to 60%. The result is a system that will support up to 500 Watt at 2 GHz in more compact equipment designs demanded by the evolving mobile environments.

In summary, the 4.3-10 series of connectors offer:

■ Flexible solution with one universal jack and 3 different plug types

■ Reliable PIM independent of torque

■ Excellent electrical performances

■ Longer life time due to reduced torque requirements

■ Small footprint (40% less than 7-16)

■ Light weight

Click Here for Detailed Connector Drawings & Specifications   
Characteristics
Applicable Standards 
Interface According toIEC 61169-54

 

Electrical 
Impedance50 Ω
Frequency RangeDC to 12 GHz
VSWR ( Cable Connector Straight)≤1.05 (DC -4 GHz)
             ≤1.09 (4-6 GHz)

 

Mechanical 
Durability ( Mating Cycles)≥100
Coupling Nut Retention≥450 N
Center Contact CaptivationAxial: ≥30 N
     Radial: ≥ 5N cm
Engagement Force100 N (typ.)
Disengagement Force80 N (typ.)
Coupling Test Torque8 Nm
Coupling torque recommended5 Nm
Pitch≥25.4 mm

 

Environmental 
Temperature Range-55°C to +90°C
Climatic CategoryIEC 60068-2-1 55/155/56
Thermal ShockIEC 61169-1, Sub-clause 9.4.4
Corrosion ResistanceISO 21207 Method B
Damp HeatIEC 61169-1 SUB-CLAUSE 9.4.3
Degree of Protection (Mated Pair) IEC 60529, IP68
VibrationIEC 61169-1 Sub-clause 9.3.3
ShockIEC 60068-2-27
Max. Soldering Temperature ( PCB Connectors) IEC 61760-1, +260°C for 10 sec

CAN’T FIND WHAT YOU NEED!

Contact us, we can assist with unique requirements.